Dynamic analysis of tapping mode atomic force microscope (AFM) for critical dimension measurement

Transient dynamics of tapping mode atomic force microscope (AFM) for critical dimension measurement are analyzed. A simplified nonlinear model of AFM is presented to describe the forced vibration of the micro cantilever-tip system with consideration of both contact and non-contact transient behavior for critical dimension measurement. The governing motion equations of the AFM cantilever system are derived from the developed model. Based on the established dynamic model, motion state of the AFM cantilever system is calculated utilizing the method of averaging with the form of slow flow equations. Further analytical solutions are obtained to reveal the effects of critical parameters on the system dynamic performance. In addition, features of dynamic response of tapping mode AFM in critical dimension measurement are studied, where the effects of equivalent contact stiffness, quality factor and resonance frequency of cantilever on the system dynamic behavior are investigated. Contact behavior between the tip and sample is also analyzed and the frequency drift in contact phase is further explored. Influence of the interaction between the tip and sample on the subsequent non-contact phase is studied with regard to different parameters. The dependence of the minimum amplitude of tip displacement and maximum phase difference on the equivalent contact stiffness, quality factor and resonance frequency are investigated. This study brings further insights into the dynamic characteristics of tapping mode AFM for critical dimension measurement, and thus provides guidelines for the high fidelity tapping mode AFM scanning.     

120t转炉炉体设备适应性技术改造

针对120 t转炉炉体变形,通过对球面螺栓及球面垫重新选材,以及对炉壳过渡段整形修复,最终实现提高球面垫磨损的三点球面支撑综合性能及消除炉壳结构修复工艺隐患,从而可为球面支撑技术补强及大面积炉壳连续曲面的修复提供参考。     

Data collection mode effect on feeling thermometer questions: A comparison of face-to-face and Web surveys

Feeling thermometer questions are widely used in political science research to estimate people’s attitudes and feelings toward a political object, like a political figure or an organization. Given the popularity of the feeling thermometer question in population surveys, more work is needed to explore the measurement of this question type. This study examines the data collection mode effect on feeling thermometers. Using the 2012 American National Election Studies, we find that the measurement of feeling thermometers is not exactly comparable between face-to-face and Web surveys. Face-to-face respondents tend to provide warmer feelings, while Web respondents give relatively more reliable responses in comparison. In both survey modes, respondents are most likely to select the response options that are verbally labeled although the effect is more striking in face-to-face than Web survey. The item nonresponse between these two modes does not differ in a meaningful way. This study ends by discussing future research directions on feeling thermometer questions.     

A web-based screening model for climate risk to water supply systems in the northeastern United States

The aim of this study is to describe the development and application of a web-based decision support tool (ViRTUE) for performing climate risk evaluations of water supply systems. The tool is designed for small-scale water utilities in the northeastern United States that may lack the resources for detailed climate change risk investigations. Development of this tool demonstrates a relatively new approach to web application development using the Shiny framework for the R programming language to create an interactive environment for stakeholders and water managers to explore climate vulnerabilities. Using a decision-scaling framework, the tool allows the user to perform a climate stress test to evaluate the performance and vulnerability to water supply shortfalls of local reservoir systems over a wide range of potential climate change scenarios using a generic systems model. Probabilities of future climate conditions derived from climate projections then help inform utility operators of impending risk.     

谐振变换器的ZVS软开关同步整流技术研究

以感应电能传输(IPT)谐振变换器为研究对象,研究了谐振变换器的ZVS同步整流(SR)技术。分析了基于SR技术IPT谐振变换器的工作原理,利用系统的谐振工作特性,提出了一种新颖的ZVS软开关SR实现方法。建立了系统频闪映射稳态数学模型,给出了ZVS软开关SR的周期不动点函数、数值求解状态变量及ZVS软开关SR工作周期的算法流程。在设计控制电路的基础上,通过实验验证了提出的同步整流技术的可行性。     

Boost converter with adaptive reference tracking control for dimmable white LED drivers

An LED driver consisting of dimmable current regulators and a boost converter with adaptive reference tracking control (ARTC) is proposed. The ARTC is realized with only one integrator and one subtractor to detect the voltage variation among the current regulators and then to generate an adaptive reference tracking voltage. Based on the reference tracking voltage, the driving voltage of the boost converter is dynamically adjusted, so as to not only maintain a minimum voltage on the current regulator but also keep the required LED-string current. A prototype control circuit including ARTC and PWM control fabricated with TSMC 0.35-μm 2P4M CMOS process validates the proposed technique. The measurement results show that the driving voltage of the boost converter is automatically regulated to compensate for the voltage alteration on the current regulators. Furthermore, the overall efficiency of the LED driver with ARTC is 6.1% better than that of the LED driver without ARTC.     

汽轮机运行调节方式优化策略探析

分析了汽轮机的喷嘴调节、节流调节、旁通调节、定压调节和滑压调节等几种基本调节方式的特点,指出现役燃煤火电机组多因调节方式单一而普遍存在着调峰能力不足、负荷响应迟缓以及因长期偏离设计工况致使运行安全经济性下降等诸多问题,提出了通过调节方式的优化组合,采用(节流)定压-滑压-(喷嘴)定压-旁通调节的复合调节方式,以实现煤电机组安全、经济、灵活、快速地参与电网的深度调峰,破解具有强随机波动性的新能源电量规模化并网的困境。     

Promising approaches to improve the performances of hybrid non‐isocyanate polyurethane

The performances of hybrid non‐isocyanate polyurethane (NIPU) materials were improved by using promising approaches. For the ring‐opening reaction of cyclic carbonate with excess amine, methanol was selected as solvent to increase the molar mass of NH₂‐terminated NIPU pre‐polymer but also caused the formation of urea as a result of eliminating hydrogen bonding between NIPU chains. Meanwhile, another approach was carried out to reduce the content of urea by altering the introduction mode of reactants, along with further increasing the molar mass of the NIPU pre‐polymer. The final hybrid materials were prepared by adding bisphenol‐A diglycidyl ether into the pre‐polymer. The results indicated that the introduction of methanol and the change of the introduction mode of reactants could improve the performance of the hybrid materials. The hybrid material derived from the forward method has optimal performance with a tensile strength of 10.8 MPa, elongation at break of 167%, a glass transition temperature of 49.1 °C and a crosslinking density of 450 mol m^?3 as well as presentable thermodynamic stability, ascribed to the high molar mass of the NIPU pre‐polymer, the low urea content and the dense crosslinking network. © 2018 Society of Chemical Industry     

基于滑模变结构控制的路径跟踪研究

为解决锅炉水冷壁磨损检测机器人的路径跟踪问题,提出了一种基于指数趋近律的滑模变结构控制的机器人路径跟踪方法。在水冷壁磨损检测机器人运动模型的基础上,进行路径跟踪误差分析,设计一种基于指数趋近律的滑模变结构控制器,再利用Lyapunov定理验证其收敛性,最后通过MATLAB软件模拟仿真,仿真结果表明该控制器可以克服误差,使位姿误差收敛至零。